drewniane nadstawki paletowe

ISPM 15 requirements by country: USA, China, Australia, the UK, Turkey (as at 2026)

ISPM 15 is an international standard that sets out how to treat and mark wooden packaging used in international trade – such as pallets, crates, racks and dunnage – to ensure it does not carry wood-boring pests. The content of the standard itself has not changed since 2019. However, the regulations of the countries that enforce it are changing, and it is these regulations that determine whether a consignment will pass inspection. A great deal has changed in 2026: the US has required a hyphen in the IPPC mark since 1 January; Turkey has been applying a new plant quarantine regulation since 4 August; and Australia, in the 2026/27, is once again treating Poland as a country at risk of the marbled stink bug. Below, we summarise the requirements of five markets that are important for Polish exporters – including a comparative table, the consequences of non-compliance and a pre-shipment checklist.

ISPM 15 in a nutshell – what all countries have in common

The ISPM 15 standard (International Standards for Phytosanitary Measures No. 15) was adopted by the International Plant Protection Convention (IPPC), which operates under the auspices of the FAO. The 2009 version is currently in force, with annexes amended in 2013 and 2018. Between 2023 and 2026, the Commission on Phytosanitary Measures did not adopt any amendments to ISPM 15.

What it covers. Solid wood packaging: pallets, crates, barrels, extensions, wedges, beams and dunnage. The standard does not cover wood-based materials – such as plywood, OSB, chipboard and fibreboard – nor components with a thickness of up to 6 mm.

Permitted processing methods:

  • HT – heat treatment: at least 56°C for 40 minutes throughout the entire cross-section of the timber,
  • DH – dielectric heating: at least 60°C for 1 minute throughout the entire cross-section,
  • MB – fumigation with methyl bromide,
  • SF – sulphuryl fluoride fumigation.

Bark. The timber must be debarked, but the standard allows for a tolerance: any remaining pieces of bark may be less than 3 cm wide (regardless of their length) or – if they are wider – have an area of less than 50 cm².

Marking. It must include the IPPC symbol, the two-letter country code, the producer code assigned by the national plant protection organisation, and the treatment code. The country code is separated from the producer code by a hyphen. The former DB marking (debarked) is no longer required, as all packaging compliant with ISPM 15 is already debarked.

What is the situation like in Poland?

A manufacturer wishing to label packaging must be entered in the official register of professional entities maintained by the State Plant Health and Seed Inspection Service (PIORiN) and obtain a separate authorisation to use the labelling. Audits and technical supervision of drying chambers are carried out by the Łukasiewicz Research Network – Institute of Wood Technology in Poznań, whilst PIORiN publishes the national list of manufacturer codes.

Fumigation with methyl bromide has been banned in the European Union since 2010; consequently, Polish export packaging is almost always heat-treated and marked with the code ‘HT’. The quality of this treatment depends on the drying process, which we describe in our article on methods of drying timber for transport crates.

In intra-EU trade, the ISPM 15 mark is not, as a rule, required. It is, however, mandatory for all exports outside the EU – including to the United Kingdom.

Comparison Table 2026

Table 1. Who enforces ISPM 15 and what requires further attention

CountryOfficeLegal basisISPM 15 has been enforced sinceWhat to look out for
USAAPHIS (Department of Agriculture) and CBP (Customs and Border Protection)7 CFR 319.40-32006 (full implementation from 5 July 2006)The hyphen in the code (“PL-…”) from 1 January 2026
ChinaGACC (General Administration of Customs)Regulations on the quarantine of wooden packaging upon import (2006, amended 2018)1 January 2006The recipient’s obligation to declare wooden packaging
AustraliaDAFF (Department of Agriculture, Fisheries and Forestry)The Biosecurity Act 2015, requirements under the BICON system1 September 2004Packing Declaration, BMSB season 1 September 2026–30 April 2027
United KingdomForestry Commission, APHAThe UK’s phytosanitary regulations following Brexit1 January 2021 (for goods from the EU)Random checks at the border and inland
TurkeyMinistry of Agriculture and ForestryRegulation on Plant Quarantine of 6 May 20261 January 2006The new regulation comes into force on 4 August 2026

Table 2. Consequences of non-compliance and changes in 2025–2026

CountryWhat are the consequences of non-compliant packaging?Changes for 2025–2026
USAEntry ban, re-export (often of the entire consignment), fine up to the value of the goodsEnd of the suspension of the hyphen rule – enforcement to begin on 1 January 2026, with no transition period
ChinaProcessing or destruction under customs supervision; in serious cases, return of the goods and a fine of up to 30,000 RMBNo changes to the regulations
AustraliaProcessing, re-export or destruction at the importer’s expenseNew rules for dunnage timber on ships (May 2026), new BMSB (ethyl formate) treatment
United KingdomRejection or destruction of the packaging; the need to arrange alternative transport for the goodsNo change; negotiations on the sanitary and phytosanitary agreement with the EU are ongoing
TurkeyDetention of a consignment, refusal of entry, return to the country of exportNew Plant Quarantine Regulation (from 4 August 2026), stricter rules for Turkish packaging manufacturers

USA – a hyphen in the mark and penalties up to the value of the goods

In the United States, APHIS (Animal and Plant Health Inspection Service) is responsible for the requirements, whilst CBP (Customs and Border Protection) enforces them at the border. The legal basis is Regulation 7 CFR 319.40-3, and full enforcement of ISPM 15 has been in force since 5 July 2006.

The mark must be legible, durable and affixed in a conspicuous place on each part of the packaging – the regulations recommend that it be placed on at least two opposite sides. APHIS requires that the packaging be free from pests, debarked and either heat-treated or fumigated.

A hyphen in the symbol from 1 January 2026

ISPM 15 has long required the country code to be separated from the producer code by a hyphen. In 2025, the US temporarily suspended enforcement of this requirement for consignments where only the hyphen was missing. The suspension ended on 31 December 2025, and from 1 January 2026, APHIS and CBP are once again enforcing this requirement – with no transition period. According to APHIS, the hyphen is essential for preventing the falsification of markings.

In practice, the mark on Polish packaging must consist of ‘PL-’ followed by the manufacturer’s number. When ordering packaging for the US market, it is worth checking this on a sample before the goods are loaded onto the container.

Monitoring and consequences

Inspectors check for the presence and correctness of the mark, as well as for signs of pests: exit holes, burrows and sawdust. Consignments with non-compliant packaging are not permitted to enter the US. APHIS issues an Emergency Action Notification, which provides for the securing, destruction of the packaging under supervision, or re-export. If it is not possible to separate the packaging from the goods, the entire consignment is returned to the country of origin.

Since 2017, CBP has also been able to impose a financial penalty under 19 USC 1595a(b) – up to the value of the goods. The penalty may be imposed on the importer, the carrier or the operator of a bonded warehouse. For a first offence, it is usually reduced to between 1 and 10 per cent of that amount; for a second offence, to between 10 and 25 per cent; and for subsequent offences, it is at least 25 per cent.

Exceptions

The regulations do not cover wood-based materials (plywood, OSB, chipboard, veneered glued laminated timber), loose filling material (e.g. wood wool), or components thinner than 6 mm. The movement of packaging between the US and Canada remains exempt from the ISPM 15 requirement – however, this does not apply to goods from Poland shipped via Canadian ports.

China – packaging notification and GACC inspection

In China, these requirements are enforced by the General Administration of Customs (GACC), which in 2018 took over the functions of the former quarantine administration (AQSIQ). The basis for this is the regulations on quarantine supervision of wooden packaging for imported goods, which have been in force since 1 January 2006 and were amended in 2018.

Wooden packaging must be treated under official supervision in the exporter’s country and marked with the IPPC mark. The consignee or their agent is required to declare to the customs authorities that the consignment contains wooden packaging.

The consequences depend on the outcome of the inspection:

  • a package bearing the mark and free from live pests – is accepted,
  • packaging without an IPPC mark – is either treated or destroyed under customs supervision,
  • serious cases – with the GACC’s consent, the packaging is returned to the exporter’s country together with the goods.

Unauthorised removal or abandonment of packaging, failure to carry out the required treatment, or the forgery or misuse of the IPPC mark is punishable by a fine of up to 30,000 RMB.

The regulations do not cover plywood, chipboard and fibreboard, wooden veneer cores, sawdust, wood wool, wood shavings and components up to 6 mm thick.

Australia – ISPM 15, Packing Declaration and the BMSB season

Australia is regarded as the most demanding market, but when it comes to wooden packaging alone, its regulations are predictable. The Department of Agriculture, Fisheries and Forestry (DAFF) is responsible for these regulations, and publishes the detailed import requirements via the BICON system.

Australia accepts solid wood packaging that complies with ISPM 15. The mark must include the IPPC symbol, the country code, the manufacturer’s number and the treatment code, which may be stamped or burnt in any colour.

Bark. Contrary to popular belief, Australia does not apply a ‘zero-tolerance’ policy. The standard ISPM 15 tolerance applies (up to 3 cm in width or up to 50 cm² in area). Where there is more bark, the consignment is subject to treatment, removal of the bark at an approved facility, re-export or destruction – at the importer’s expense.

Packing Declaration. For sea consignments in containers (both FCL and LCL), a packing declaration is required. It must specify whether the wooden packaging complies with ISPM 15, has undergone another treatment recognised by Australia, or is untreated. Declaration:

  • it should be drawn up on the packer’s letterhead, bearing the company’s name and address,
  • it must be signed by the person named by their first name and surname – a company stamp alone is not sufficient,
  • it must be dated and linked to the consignment (container number, bill of lading or invoice),
  • For FCL containers, it also includes a declaration that the container is clean.

Packaging made entirely of plywood, veneer or wood-based panels does not need to be declared.

Deck timber on ships. In May 2026, DAFF introduced a separate procedure for deck timber used on ships. Marked timber that complies with ISPM 15 requires no further action if it is clean. However, Australia does not recognise certificates of treatment carried out overseas or during the voyage for such timber.

Non-compliant packaging is subject to mandatory treatment, re-export or destruction – always at the importer’s expense.

BMSB season 2026/27 – Poland on the list of high-risk countries

Irrespective of ISPM 15, Australia introduces seasonal measures against the brown marmorated stink bug (BMSB) every year. For the 2026/27 season, these measures apply to goods loaded onto a vessel between 1 September 2026 and 30 April 2027 (the date of loading as stated on the bill of lading applies). Poland is on the list of high-risk destination countries, alongside, amongst others, Germany, France, Italy, the Czech Republic, Turkey and the USA.

This mandatory procedure applies to high-risk goods falling under customs tariff headings 44, 45, 57, 68–70, 72–76 and 78–89. These include machinery and equipment (heading 84), electrical equipment (85), vehicles (87) and wood products (44), including crates and pallets shipped as goods. The measures also cover other goods if they are shipped in the same container as high-risk goods.

Key rules:

  • Permitted treatments: heat treatment, fumigation with methyl bromide or sulphuryl fluoride, and, from the 2026/27 season, ethyl formate as well.
  • Treatment abroad must be carried out by a provider registered and approved under the Australian AusTreat system. Treatment carried out by other providers is deemed invalid.
  • FCL containers can be treated either before shipment or on arrival, on a whole-container basis.
  • Break bulk cargo, including that carried on flat rack platforms and in open-top containers, must undergo a treatment prior to dispatch.

An important distinction: the ISPM 15 mark on the crate does not exempt the machine inside from the BMSB treatment. These are two separate requirements.

United Kingdom – ISPM 15 since Brexit

From 1 January 2021, solid wood packaging transported between the UK and other countries, including EU Member States, must comply with the requirements of ISPM 15. This requirement applies to crates, boxes, drums, pallets, pallet boxes, pallet collars and dunnage. It does not apply to plywood and other wood-based materials, nor to timber with a thickness of up to 6 mm.

Inspections are carried out by the Forestry Commission in conjunction with APHA. They are selective, risk-based and random. Packaging may be inspected at the border or at its final destination inland, and there is no requirement to declare the wooden packaging in advance.

Non-compliant packaging may be rejected or destroyed, in which case the importer must arrange for the goods to be transported onwards by other means. Inspectors issue official orders, and failure to comply with these constitutes an offence punishable by civil or criminal sanctions.

Northern Ireland. Goods from the EU destined for Northern Ireland or Ireland – including those in transit through the United Kingdom – do not require packaging that complies with ISPM 15.

The Sanitary and Phytosanitary Agreement with the EU. In May 2025, the UK and the EU agreed to work towards establishing a common sanitary and phytosanitary area. At the time of publication of this article, the agreement has not yet been signed, and it is scheduled to come into force in 2027 at the earliest. It is not yet known whether it will change the requirements for wooden packaging. Until then, ISPM 15 remains in force without change for trade with the UK.

Turkey – new regulation on plant quarantine

In Turkey, the Ministry of Agriculture and Forestry is responsible for the inspection of wooden packaging. ISPM 15 has been enforced there for around 20 years, but the legal basis changed in 2026: On 6 May 2026, a new Plant Quarantine Regulation (Bitki Karantinası Yönetmeliği) was published, which came into force on 4 August 2026 and replaced the 2011 regulations.

Wooden packaging accompanying goods other than plants is inspected in conjunction with customs authorities, depending on the risk assessment and the frequency of inspections. Inspectors check whether the packaging complies with the requirements of ISPM 15. The absence of an IPPC mark is grounds for detaining the consignment, and non-compliant packaging is not permitted to enter the country and is returned to the exporter’s country.

Heat treatment report. In recent years, Turkey has tightened regulations for its own packaging manufacturers: from 2025, it has introduced additional requirements and administrative penalties, and from 31 December 2026, QR code labelling. Turkish companies may reuse foreign packaging for their own exports only if they have a heat treatment report from the country of origin. Therefore, a Turkish customer may ask a Polish supplier for such a report – it is worth being prepared for this.

Checklist – wooden packaging for export outside the EU

  1. Check the requirements of the destination country – and, for shipments to Australia, also the BMSB season dates and the category of goods.
  2. Purchase packaging from an authorised manufacturer listed on the national PIORiN register.
  3. Check the marking: the IPPC symbol, ‘PL-’ with a hyphen, the producer’s number and the treatment code (HT). Ideally, these should be on two opposite sides of each item.
  4. Mark every solid timber item – not just crates or pallets, but also wedges, beams, stands and dunnage.
  5. Only use processed and marked timber for repairs. A single unprocessed plank may compromise the compliance of the entire packaging.
  6. Keep an eye on the bark – the packaging must comply with the ISPM 15 tolerance limits.
  7. Prepare the documents – the Packing Declaration for Australia, the heat treatment report at the request of the consignee in Turkey, and photographic documentation of the markings.
  8. Store the treated packaging in a dry and clean place to prevent it from being re-infested by pests before dispatch.

We discuss in more detail how phytosanitary requirements relate to packaging design in our article on the most common mistakes made when packaging machinery for export, and we cover the specific features of pallets in the post ‘IPPC-certified wooden pallets’.

IPPC packaging at Danpol

Danpol manufactures wooden export packaging from heat-treated timber marked in accordance with the IPPC standard. Our range includes made-to-measure transport crates, pallets, pallet extensions and platforms, IPPC-compliant wooden racks, and dunnage timber for securing cargo within containers. This means that the entire contents of the container – from the packaging to the wedges and struts – can come from a single supplier and feature consistent marking. You can find information about our accreditations on the certificates page, and details of our comprehensive shipment preparation services in our export packaging offer.

FAQ

Does ISPM 15 apply to exports to the UK?

Yes. From 1 January 2021, solid wood packaging transported from the EU to the UK must comply with ISPM 15 and bear the IPPC mark. Exceptions are goods destined for Northern Ireland or Ireland, including those in transit through the UK. The Sanitary and Phytosanitary Agreement currently being negotiated with the EU has not, as yet, changed these rules.

Will the US accept packaging without a hyphen in the IPPC mark?

Not from 1 January 2026. APHIS and CBP have ended the suspension of enforcement of this requirement and, without a transition period, are treating the mark without a hyphen as non-compliant. This may result in the shipment being detained, the packaging or the entire consignment being re-exported, and a financial penalty.

Do plywood and OSB require an IPPC mark?

No. ISPM 15 applies only to solid wood thicker than 6 mm. Plywood, OSB, chipboard and fibreboard are exempt in all five countries described. However, if a plywood crate has solid wood runners or battens, these components must be treated and marked.

Is Poland a BMSB risk country for Australia?

Yes. For the 2026/27 season (from 1 September 2026 to 30 April 2027), Poland is on the list of high-risk destination countries. High-risk goods, including machinery, equipment and timber products, require mandatory treatment during this period, either by an approved provider or upon arrival in Australia.

Who pays if the packaging is challenged at the border?

Formally, the costs of processing, destruction or re-export are usually borne by the importer – in Australia, the regulations state this explicitly, whilst in the US, the importer, carrier or customs warehouse may be liable for a penalty. In practice, the importer recovers these costs from the exporter under the terms of the contract, so non-compliant packaging almost always results in a financial burden for the consignor.

Is it possible to send a package that has been fumigated with methyl bromide from Poland?

No. Fumigation with methyl bromide has been banned in the European Union since 2010. Polish export packaging is heat-treated and marked with the code ‘HT’, which is accepted by all the countries listed.

Summary

ISPM 15 is a single standard, but there are five different enforcement practices. From 2026, the US will strictly check for the hyphen in the mark and may impose a fine of up to the value of the goods. China requires the recipient to declare packaging and destroys or returns any without the mark. Australia combines ISPM 15 with a packaging declaration and seasonal BMSB measures, under which Poland is classified as a high-risk country. Since Brexit, the UK has been inspecting packaging from the EU selectively but consistently. From August 2026, Turkey will apply a new regulation and return non-compliant packaging to the exporter’s country. The common denominator is simple: every solid wood item must come from an authorised manufacturer, be heat-treated and correctly marked.

Are you preparing a shipment outside the EU? Contact Danpol – we’ll prepare crates, pallets and dunnage timber with IPPC marking, tailored to the requirements of the destination country.

SEO meta

Meta title:

ISPM 15 requirements by country – Table 2026

Meta description:

ISPM 15 requirements in the USA, China, Australia, the UK and Turkey in 2026: labelling, inspections, penalties and changes. A comparative table for exporters.

Similar Posts